Skip to content
UI apps

IEC 61850 Explorer

Connect to an IEC 61850 IED, open its SCL file or a packet capture of the station bus, and see the model, the values with quality and time, and what happened on the wire. Read-only by default; controls and writes only in a granted, audited Commission mode.

IEC 61850 Explorer connected to a feeder IED in Observe mode: the frequency MMXU1.Hz read under FC MX with its magnitude, quality good and time stamp, the MMS item it came from and the namespace that defines it, and below it two points polled every second in the watch table.
A live IED in Observe mode: a value read with its quality, time stamp and MMS item, and two points polled every second.

What it does

See it in action

Three and a half minutes on the demo substation that ships with the Explorer: search an SCD by quantity, check conformance, compare a live IED with its CID, operate a breaker in Commission mode and analyse captures of a fault.

Protocols

Works with

The README on GitHub has the full feature list, examples and changelog.

go-iec61850

IEC 61850 in one library: MMS client and SCL-driven server, GOOSE and Sampled Values publishers and subscribers, and SCL parsing, with logical nodes, reports, controls and control blocks as first-class Go types.

go get github.com/otfabric/go-iec61850

go-mms

MMS (ISO 9506) client and server with the full ISO upper-layer stack, the transport underneath IEC 61850: typed errors, metrics, retries and graceful shutdown, fuzzed and interop tested.

go get github.com/otfabric/go-mms

go-mms-trace

Read pcap and pcapng captures of IEC 61850 traffic offline: MMS associations, every confirmed service with its status and latency, reports, GOOSE and Sampled Values streams, and what the capture lost. Library and mmstracectl.

go get github.com/otfabric/go-mms-trace

go-iec61850-model

The IEC 61850 information model without a transport: an edition-aware catalog of logical nodes, data objects, CDCs and data attributes from every official NSD release, with reference validation, type resolution and semantic mapping.

go get github.com/otfabric/go-iec61850-model
  • IEC 61850 model
GitHub

iec61850ctl

IEC 61850 from the terminal: browse IEDs, read and write, operate controls and subscribe to reports over MMS, and sniff, subscribe to and publish GOOSE and Sampled Values on the station bus.

nsdctl

The CLI included with go-iec61850-model: look up what an IEC 61850 logical node holds, explain a reference, and inspect, validate, compare and generate from NSD packages.

go-cotp

COTP TP0 transport service over RFC 1006, plus a full X.224 TPDU codec.

go get github.com/otfabric/go-cotp

go-tpkt

TPKT framing for RFC 1006 and RFC 2126 transport profiles.

go get github.com/otfabric/go-tpkt

iec61850-interop

IEC 61850 reference stacks as containers: libiec61850, IEC61850bean, dscsystems/go-iec61850, iec61850-rust and cB-Sigma, for MMS, IED services, GOOSE and Sampled Values. Formerly mms-interop.